Crafty jewelry: unique gifts for women

 

Crafty jewelry: unique gifts for women

cute handbag, necklace, fashion...

2. 

3. 

4. 

5. 

6. 

7. 

8. 

9. 

10. 

11. 

12. 

13. 

14. 

15. 

16. 

17. 

18. 

19. 

20. 

21. 

22. 

23. 

24. 

Found on the internet

Crafty jewelry: jewelry making

 "Pearl Falls"

 

Procedure:

1. Take seven of polyester cord to 35 cm and wrap them with wire, making 2.5 turns.
2. Pull on the cord and the tip of the wire clamp polyester cords.
3. Stepping back from the 8 mm clamp, cut wire cutters.
4. Fold the tip of the wire kruglogubtsami to the ground, making a needle. Similarly, steps and on the other end of the cord.
5. Stepping back from 10-12 cm, clip, attach the polyester cords wire diameter of 0.2 cm for wire ropes that go around and screw one end of wire around another.
6. String on this wire and pearl wrap wire cords with beads, obvorachivaya wire around the cord. So take 32 turns.
7. Another part is decorating it. Pass on the pearl and glass bead pin, while another glass - carnations. Stepping back from the 8 mm beads, trim the tips of the pins and cloves.
8. Make a bead on each ears. Kruglogubtsami grab the tip of the nail and pin, and drive it until it stops.
9. A little half-open eye on the pearl, attached to the eye pins on a glass bead. And to the other eyelet glass beads, attach the remaining beads. With the help of a ringlet attach this chain of beads to the center foundation jewelry.
10. Take six pearls. 5 of them to thread the pin, and one - on a nail. Make them ears, and clinging to them, attach them to each other. With the help of a ringlet to attach this chain based ornaments, stepping back 2 turns of the chain attached to the base.
11. Make 7 more strings of small pearls, and 8 of pearl and glass beads (attaching them to each other in any order). Now connect all the chains to the base of jewelry, alternating between these strings of beads to each other.
12. To one end of the jewelry using tools, attach the ring, while the other - a ring with a carbine.    
     Found on the internet

Crafty jewelry: Beaded necklaces, jewelry making

Necklace "Desert"

is still one of my creation. "Desert," because the beads picked up a peach and chocolate colors, and of themselves a golden peach beads. Koleshka trailed on the basis of the scheme OlgiK "On the anniversary," as amended. = read more weaving is such a scheme: 1. woven chain - eight out of beads. I wove on the line size of 0.20, a thread, too, think you can, but the line was not so noticeable. The beads took 0.6 mm and 1.0 mm in diameter 2. chain embroidered with beads in 2 stages, this is the first. The black arrows indicate the motion of the threads inside bead3. In the second stage of grouting thread through each bead twice. pass thread through the bead (black arrow), we collect the right amount and type of beads string of beads in the same side again (blue arrow), and beads to go on a diagonal from the top bead. Then we pass a thread through the next bead, etc.

Crafty jewelry: Beaded necklaces, jewelry making

Crafty jewelry: bead and paper necklace for Halloween, kids craft ideas

BOO-TIFUL HALLOWEEN CHARM BRACELET

Crafty jewelry: bead and paper necklace for Halloween, kids craft ideas

The perfect accessory for any Halloween party, these gorgeously ghastly charms really make a statement! These are a great accompaniment to a witch costume or a fun and creative craft for a Halloween party. Making the charms will require help from Mom, but once assembled, they're easy for young crafters to string onto beading elastic.

Supplies: 

Colored pencils or markers
Thin jeweler's wire or craft wire (flexible enough to bend without pliers)
Glue stick or glue dots
Scrapbook paper
Scissors
Pencil (for drawing the charms)
Beading elastic
Pony beads
Drop of craft glue

Here's how:

	1. For each charm, cut out matching pairs of miniature Halloween symbols, such as mini pumpkins or skulls (those shown here measure about 3/4 inch to 1-1/4 inches wide/tall). An easy way to accomplish this is to put two squares of paper back to back so you can cut out both at once. Then, your child can use colored pencils or markers to embellish the charms as she likes. You can even create candy corn by gluing strips of yellow, orange, and white paper together, as shown, and then cutting the shapes from it.
	2. Cut a 2-1/2-inch length of wire for each charm. Loosely bend each length in half and twist the ends together a few times about 1/8 inch below the bend to form a small loop, as shown. Use glue dots to sandwich the ends of one of these little hangers between the two pieces of each charm. (Trim the wire ends with scissors if they are too long). Firmly squeeze together the two layers of the charm to make sure they are well adhered to the wire and each other.
	3. Cut a length of beading elastic that is several inches longer than the circumference of your child's wrist.
	4. With each charm, slide a pony bead down over the wire loop so that it rests just above the charm. String the charms onto the elastic, spacing them apart with several pony beads.
	5. When the bracelet is the desired length, tightly tie the ends of the beading elastic together with an overhand knot, leaving a little bit of slack so the charms will dangle. Use a dab of glue to secure the knot, if needed. Trim the elastic ends about 3/4 inch from the knot and thread them back through the adjacent beads to hide them. Source:sheknows.com

Flowers for birthday: Kids craft ideas

 
 Beaded flower tutorial
Flowers for birthday: Kids craft ideas